Nordic nRF5340-Audio-DK

chip:nrf53, chip:nrf5340

The nRF5340-Audio-DK is a development kit dedicated for Bluetooth LE Audio application based on the nRF5340 from Nordic.

Peripheral Support

Peripheral Support NOTES

---

UART QSPI Buttons LEDs USB SD Card NFC PDM Microphone (VM3011) Audio DSP (CS47L63) Yes No No No No No No No No

Serial Console

Serial console for the application core:

Pin Signal Notes

---

P1.05 APP UART0 TX virtual COM 0 P1.04 APP UART0 RX virtual COM 0

Serial console for the network core:

Pin Signal Notes

---

P1.09 NET UART0 TX virtual COM 1 P1.08 NET UART0 RX virtual COM 1

LEDs and Buttons

LEDs

The nRF5340-Audio-DK has 4 user-controllable LEDs:

LED MCU

---

LED1 P0.31 LED2 P1.01 LED3 P1.02

A low output illuminates the LED.

CONFIG_ARCH_LEDS

If CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under control of the application. The following interfaces are then available for application control of the LEDs:

uint32_t board_userled_initialize(void);
void board_userled(int led, bool ledon);
void board_userled_all(uint32_t ledset);

Pushbuttons

BUTTON MCU

---

BUTTON1 P0.02 BUTTON2 P0.03 BUTTON3 P0.04 BUTTON4 P0.05 BUTTON5 P0.06

Configurations

Each configuration is maintained in a sub-directory and can be selected as follow:

tools/configure.sh nrf5340-audio-dk:<subdir>

Where <subdir> is one of the following:

nsh_cpuapp

Basic NuttShell configuration for the application core (console enabled in UART0, exposed via J-Link VCOM0, at 115200 bps).